|
|
 |
|
From 1,000 kN up to 10,000 kN clamping force, the complete range
The assets of the new DESMA horizontal machine series D 969 (S1)
 |
The very stable 4-tie-bar design of the clamping unit guarantees a minimum of deflection and the precise guiding of platens and hydraulic lifting devices. The use of the retractable injection unit FIFO B reduces deflections within the nozzle area almost completely due to the minimally dimensioned through hole in the platen and the additional nozzle contact force. The model D 969.300 Z (S1) was especially developed for production of precision seals and O-rings. It offers an extraordinarily high specific surface compressing with compact overall dimensions.
|
The feautures
- very deflection-resistant structure of the clamping unit in 4-column design
- stable construction of the machine base allows for use of heavy moulds
- precise platen positioning due to synchronized lifting devices
- perfect manual accessibility of the complete clamping unit area
- ergonomic overall machine design
- optionally with retractable injection unit FIFO B
- optionally with integrated injection unit FIFO C
- electrically driven automation systems
- automatic demoulding control
- DESFlex system to minimize waste
|
|
D 969.100 Z (S1)
1,000 kN clamping force and all features of a larger machine |
| |
|
|
D 969.160 Z (S1)
A perfect "seal machine" with 1,600 kN clamping force and largely dimensioned clamping unit |
| |
|
|
D 969.300 Z (S1)
With 3,000 kN clamping force our best seller for precision articles. Very compact overall dimensions with a very high specific surface compressing and injection pressures up to 3,500 bar guarantee top results. |
| |
|
|
D 969.400 Z (S1)
4,000 kN clamping forces for large-scale production in perfection |
| |
|
|
The D 969.560 Z (S1) with automation
|
Advanced automation systems
As pioneer in innovative automation of horizontal machines, DESMA provides a wealth of
application know-how.
Electrical axes/ servo-drives, laser scanning of mould surfaces,
rubber rolls, efficient silent brushes - all integrated in our control systems - are only
some landmarks. Equally, articles/ waste sorting and automatic separation of tear-trims
are part of our expertise. This all is feasible throughout a clamping force range from 1,000 kN
to 10,000 kN for shot volumes up to 25,000 cm3.
>> Data sheet
To view the data sheet in pfd-format, the Adobe Reader is required.
Just click on the logo stated below to load it down.
|
 Print page (change to landscape please)
|
|
