|
|
 |
|
BENCHMARK series
Ergonomic vertical machines from the inventor
The highest marks in all areas! The ergonomic trend-setter from DESMA has set new standards and even makes large machines up to 10,000 kN simple to operate.
Of course without pits, ladders or platforms!
The BENCHMARK series furnishes advantages which have never been previously available. Perfect conditions for the production demands of the future. Hundreds of machines installed worldwide are evidence of this success.
 |
|
The BENCHMARK advantages
- User friendly working heights of 750 mm to 900 mm (from the floor to the upper surface of the heating platen)
- Easily reachable strip intake
- Lowest overall machine height
- Fully hydraulic clamping system with automatic mould height adjustment
- Long opening strokes
- Largely dimensioned clamping unit which is extremely deflection resistant
No need for pits, ladders and platforms!
|
COMPACT size - The biggest BENCHMARK of all time.
Ingenious BENCHMARK clamping system
|
|
With the D 968.1000 ZO B 900 the BENCHMARK machine series is completed upwards. All clamping forces ranging from 2,500 kN - 11,000 kN* are since available. A machine with a working height of 900 mm only and injection volumes up to 22,900 cm³ is unequalled with such compact dimensions. Not so long ago, it was more difficult to operate standard machines of 4,000 kN than it is now possible with this machine of 10,000 kN. Typical of this series are the exceptionally large strokes.
Moreover, the full-hydraulic BENCHMARK clamping system guarantees high rigidity of the clamping unit. It goes without saying that this new development is fitted with the latest protective covering which delivers maximum flexibility for rebuilding or retrofitting. Its compact overall dimensions is an amazing property.
Performance features:
| Max. injection volume: |
22.900 cm3 |
| Working height floor/heating platen upper edge: |
900 mm |
| Maximum opening stroke: |
1,025 mm |
| Maximum clamping force: |
11,000 kN |
| Clearance between heating platens |
1,225 mm |
| |
| * pressure increased |
|
>> Special machine for large-volume LSR products
>> Data sheet
To view the data sheet in pfd-format, the Adobe Reader is required.
Just click on the logo stated below to load it down.
|
 Print page (change to landscape please)
|
|
